How Our Filters Work

A plain-English guide to what happens to your water inside a Willowtap filter, what it helps with, what it doesn't do, and how to keep it working well.

Is my tap water safe? What people notice Tap filter Countertop filter Shower filter Cleaning & care What filters don't do

💧 First things first: UK tap water is safe

Tap water in England and Wales is among the most tested in the world. The official regulator, the Drinking Water Inspectorate, reports that more than 99.9% of tests meet the required safety standards.

So a filter isn't about making unsafe water safe. It's about the things people notice day to day – the taste, the smell, the odd bit of sediment – and about drinking more tap water instead of buying bottled water.

👃 What people notice about tap water

A chlorine taste or smell

Water companies add a small, safe amount of chlorine to keep water free of germs on its long journey through the pipes to your home. It's there for a good reason, but some people are sensitive to the taste or "swimming pool" smell.

Sediment and particles

Tiny bits of sediment or rust can sometimes come from old pipes, especially in older homes and flats.

Limescale (hard water)

Much of the UK has hard water, which leaves white limescale on kettles and taps. Our filters are not water softeners – see what filters don't do below.

🚰 Tap Filter Pro – how it works

The filter screws onto the end of your kitchen tap. A small lever lets you choose filtered water (for drinking and cooking) or normal water (for washing up, so the cartridge lasts longer).

Tap water→Ceramic outer shell→Carbon & mineral core→Your glass

1. The ceramic shell

Ceramic is full of tiny pores. As water is pushed through, particles such as sediment and rust are physically caught on the outside of the cartridge – a bit like a very fine sieve. That's why the outside of the cartridge slowly turns brown or grey: it's doing its job.

2. The activated carbon core

Activated carbon is a material with a huge surface area full of tiny holes. It's widely used in water filters to reduce the taste and smell of chlorine.

🫗 Countertop Filter – how it works

The countertop filter sits beside your sink and connects to your tap with the included tap kit – no plumbing, no electricity. Water flows from your tap, through the unit, and out of its own spout.

Tap water→Sintered carbon rod→Filter spout

Inside is a sintered activated carbon rod – carbon that has been pressed and heated into one solid block. Water has to pass slowly through the whole block, which helps reduce chlorine taste and smell and catch fine particles.

It's a good choice for renters: when you move, it comes with you.

🚿 Shower Filter – how it works

The shower filter replaces your shower head and screws onto a standard ½-inch UK shower hose. A replaceable filter cartridge sits inside the handle, so all the water passes through it before it reaches you.

Shower hose→Cartridge in the handle→Spray or rainfall

The cartridge catches sediment and particles. It comes with 5 cartridges, so you can change it when it looks discoloured or the flow drops.

It also has spray and rainfall modes and a one-touch stop button, so you can pause the water while you shampoo.

🧽 Cleaning & looking after your filter

Tap Filter Pro – clean the ceramic every 7–10 days

  1. Turn off the tap and unscrew the filter housing.
  2. Take out the ceramic cartridge.
  3. Under running water, gently rub the outside with the cleaning sandpaper included in the box until the brown or grey layer comes off.
  4. Rinse it, put it back, and screw the housing on firmly.
  5. Run filtered water for about a minute before drinking.

Why clean it? The ceramic traps particles on its surface. Over time that layer builds up and slows the flow. Cleaning removes it so water flows freely again.

When to replace it: each cartridge lasts around 3–6 months, depending on your water and how much you use. Replace it sooner if the flow stays slow after cleaning, or if the cartridge gets noticeably smaller from sanding.

Countertop Filter

The carbon rod can't be cleaned – it's replaced. Follow the timing in the instructions supplied, and replace it sooner if the flow slows a lot or the chlorine taste comes back. Wipe the outside with a damp cloth.

Shower Filter

Change the cartridge when it looks discoloured or the water pressure drops. Unscrew the handle, swap the cartridge, and screw it back on. You get 5 in the box.

💡 Tip: If you haven't used a filter for a few days (for example after a holiday), run the water through it for a minute before drinking.

✋ What our filters don't do – being honest

📚 Sources

Questions? Email hello@willowtap.co.uk – you'll get a reply from a real person.

Shop Filters